1. The dust removal and separation pipe is blocked, and the dust in the cleaning room is not discharged in time, resulting in secondary pollution of the workpiece. Suggestion: Clear the dust removal port of the separator.
2. The crushing rate of steel shots is high. For example, some customers use non-standard steel shots for cheapness. After crushing, the dust is particularly large, and the dust collector cannot be cleaned in time. Suggestion: Replace the steel shots
3. When the equipment replaces the wearing parts, the workers do not mark them, resulting in changes in the opening angle of the directional sleeve, and not enough steel shots are thrown onto the workpiece. Suggestion: Adjust the reasonable directional sleeve angle.
4. The dust collector bag or filter cartridge is blocked and produces resistance, affecting the filtering effect. It is recommended to clean the bag or filter cartridge, or even replace it.
Steel shot is widely used for descaling and rust removal treatment
How are steel shot and grit used to treat steel surfaces?
Steel shot is widely used for descaling and rust removal treatment
What are the unique characteristics of steel shot?
